| Firesafe shutoff valves
are specifically designed for flammable liquid service. Whether automatically
or manually operating, normally open or normally closed, these control
valves have withstood, for at least 15 minutes, a typical direct-fire exposure.
The exposure test products time-temperature characteristics typical of
uncontrolled fire. Valves are tested in the closed position and must
prevent steady stream or spurt leakage at the manufacturer's temperature
and pressure ratings during the fire exposure. |
Manual or Air-Actuated Firesafe
Ball Valve, Model Nos. C (or BC)-11 (or 16) 11 (or 22, 33, 66)-BD (or BC,
CC, LC)-FP (optional)-FS-GR (optional)-200SR (or -275SR, -375SR, -500SR,
-200SR-60, -375SR-60, -500SR-60 actuator, optional) -D1 (or AL, optional),
sizes 1/4" through 4" (6 through 102mm). Valves with suffix FP Fullport)
available only in sizes 1/2" through 3" (13 through 76mm). Rated
for 125 psi (860kPa). Automatic closure of air-actuated units by
fusing of 165º or 212ºF (74º or 100ºC) air relief.
Manual Firesafe Ball Valve,
Model Nos. C-11 (or 16) 66-BB (or CC)-FS, sizes 6", 8" 9152, 203mm).
Rated for 125 psi (860kPa). |
13650
T.I. Boulevard, Suite 106 • Dallas, TX 75243 • U.S.A. • Phone: 972-644-4395,
800-956-8447 • Fax: 972-644-4616
