|
MenuMaker produced NavBar
|
|
LinaValve
BT
|
|
|
Linatex
LinaValve BT is a handwheel operated enclosed pinch valve designed
for effective control of abrasive and corrosive flow media. With its
centerline close, dual action pinch mechanism the LinaValve BT can
attain both efficient modulating control and drip tight closure. Lined
with Linatex premium natural rubber, the LinaValve BT is well suited
for harsh, highly abrasive flow control applications in liquidsolid
slurry and gas-solid pneumatic onveying services. The abrasive-resistant
rubber lining contributes to the valve’s long wear life and low
maintenance costs. |
-
Linatex
anti-abrasive premium red rubber is the standard sleeve lining
-
Full
bore/full flow design results in low friction lossand high flow
capacity
-
Center
pinch design for predictable linear flow performance, reduced
turbulence and longer sleeve wear life
-
Closed
body design provides a secondary containment in the event of
a sleeve failure
-
Low force manual handwheel actuation
-
Short
valve length accommodates tight installation requirements
-
One piece sleeve protects operating mechanism and body parts
from exposure to process.
-
High flexibility sleeve design reduces closing forces, improves
recovery to full open position and ensures drip tight closure.
-
Sleeve’s full face flanges provide a reliable seal when
the valve is bolted up to a standard flat face flange.
-
Elastomer sleeve reduces piping vibration andwater hammer.
|
|
Options:
-
Wide variety of natural rubber and synthetic rubber sleeve linings
available.
- Special
sleeve designs include reduced bore, extra heavy linings and ultra
flexibility.
-
Pneumatic, electric and hydraulic actuators with a full range
of control systems.
-
Custom body and sleeve designs for high pressure or special service
applications.
|
|
Construction:
- Heavy-duty
cast and fabricated steel bridge, pinch anvils and half bodies;
assembled with high quality fasteners and premium screw-stock
steel tie rods.
-
One piece vulcanized pinch sleeve is reinforced with multiple
layers of high tensile strength fabric cord.
- Premium
quality abrasion and corrosion resistant rubber lining on sleeve’s
interior surface; ozone, oil and UV resistant outer cover.
- Double
acting pinch mechanism with single input shaft.
- Cast
iron or fabricated steel handwheel. Standard full circumference
style on 1 inch through 3 inch sizes and exterior spoke assisted
style on 4 inch through 8 inch
sizes. A bevel gear with side mounted handwheel is supplied on
10 inch and above.
-
Body end flanges are compliant with ANSI Class 125/150 lb. standards
|
|
|
|
