|
LinaValve
RT
|
|
|
Linatex
LinaValve RT is a pneumatic or hydraulic operated enclosed pinch valve
designed for effective control of abrasive and corrosive flow media.
With the proper instrumentation and pressure control, the LinaValve
RT can provide both efficient modulating flow control and drip tight
shut off. The full bore/full flow valve design results in low friction
loss and high flow capacity. Applicable in liquid-solid slurry and
gas-solid pneumatic conveying services, the LinaValve RT with its
short valve length can accommodate tight installation requirements. |
-
Linatex anti-abrasive premium red rubber is the standard sleeve
lining.
-
Pneumatic or hydraulic medium can be used to operate the valve.
-
Full bore/full flow design results in low friction loss and
high flow capacity.
-
Closed body design provides a secondary containment in the event
of a sleeve failure.
-
Short
valve length accommodates tight installation requirements.
-
Valve can be operated in any position.
-
High
flexibility sleeve design reduces closing forces, improves recovery
to full open position and ensures drip tight closure.
-
Valve
and sleeve design allows drip tight closure even with solids
in the medium.
-
Elastomer sleeve construction reduces piping vibration and water
hammer.
|
|
Options:
- Wide variety
of natural rubber and synthetic rubber sleeve linings.
- Special
sleeve designs include reduced bore, extra heavy linings and ultra
flexibility.
- Pneumatic
and hydraulic actuation with a wide range of control systems.
- Custom
body and sleeve designs for special service applications.
|
|
Construction:
- Heavy-duty
cast half bodies assembled with high quality fasteners.
- One piece
vulcanized pinch sleeve is reinforced with multiple layers of
high tensile strength fabric cord and steel reinforced flanges.
- Premium
quality abrasion and/or corrosion resistant rubber lining on interior
surface; and ozone, oil and UV resistant outer cover.
- Body end
flanges are compliant with ANSI Class 125/150 lb. standards.
|
|
|
