|
MenuMaker produced NavBar
|
|
LinaValve
ST
|
|
|
Linatex
LinaValve ST is a handwheel operated, open frame pinch valve designed
for effective control of abrasive and corrosive flow media. The valve’s
Linatex lined one-piece sleeve design makes it suitable for harsh,
highly abrasive flow control applications while protecting the pinch
mechanism and other parts from exposure to the process. The extended
length of the LinaValve ST improves sleeve closing and opening performances
while reducing stress on sleeve end connections. Applicable in liquid-solid
slurry and gas-solid pneumatic conveying services, the LinaValve ST
design results in abrasion-resistant high flow capacity. |
-
Full bore/full flow design results in low friction loss and
high flow capacity.
-
Center pinch design for predictable linear flow performance,
reduced turbulence and longer sleeve wear life.
-
Open body configuration allows easy visual evaluation of valve
position, simplifies valve maintenance and sleeve replacement,
and lowers weight.
-
Extended valve length improves sleeve closing and opening performance,
reduces stresses on sleeve end connections, and minimizes wear
on adjacent piping.
-
High flexibility sleeve design reduces closing forces, improves
recovery to full open position and ensures drip tight shut off.
-
One
piece sleeve protects operating mechanism and body parts from
exposure to process.
-
Elastomer
sleeve reduces piping vibration and water hammer.
-
Low
force manual handwheel actuation.
-
Stub
end sleeve design allows changing sleeve without removing the
valve from the process line.
|
|
Options:
-
Wide variety of natural rubber and synthetic rubber sleeve linings.
- Special
sleeve designs include reduced bore, extra heavy linings and ultra
flexibility.
- Pneumatic,
electric and hydraulic actuators with a wide range of control
systems.
-
Custom body and sleeve designs for special service applications
|
|
Construction:
- Heavy-duty
cast and fabricated steel bridge, pinch anvils, side plates and
end flanges assembled with high quality fasteners and premium
screw-stock steel tie rods.
- One
piece vulcanized pinch sleeve is reinforced with multiple layers
of high tensile strength fabric cord and includes steel reinforced
stub ends.
- Premium
quality abrasion and/or corrosion resistant rubber lining on interior
surface; and ozone, oil and UV resistant outer cover.
- Double
acting pinch mechanism with single input shaft.
- Cast
iron or fabricated steel handwheel. Standard full circumference
style on 1 inch through 3 inch sizes and exterior spoke assisted
style on 4 inch through 8 inch sizes. A bevel gear with side mounted
handwheel is supplied on 10 inch and above.
- End
flanges are compliant with ANSI Class 125/150 lb. standards.
|
|
|
|
