TECHNO-POLYMER
PLASTIC ACTUATOR
PINION AND FASTENER IN STAINLESS STEEL
GENERAL FEATURES
- Double Acting or Spring Return with
spring cartridges made with non metallic materials (springs are
epoxy coated).
- Pinion with anti-blow protection
in both directions.
- Standard working temperature: -4°F
+176°F (-20 +80°C)
- Lower female pinion with double square
according to ISO 5211/DIN 3337 F03 o F04 standards, for valve assembly.
- Upper drilling for accessories and
upper pinion machining according to NAMUR VDI/VDE 3845 standards.
All air connections are 1/4" NPT.
- Solenoid valve connection according
to NAMUR VDI/VDE 3845 made with an insert in allow UNI 5076 (ASTM
B 179) coated with high corrosion resistance material.
- Serial progressive number stamped for
tractability.
- 100% seal and running test carried
out on electronic equipment; test certificates.
- Supply: air (lubricated if possible),
hydraulic oil or water, min 40 psi and max 120 psi.
|
BILL
OF MATERIAL
|
| 1 |
SCREW |
7 |
PISTON SKATE |
13 |
PINION |
| 2 |
END CAP |
8 |
SEEGER RING |
14 |
BEARING |
| 3 |
O-RING |
9 |
INDICATOR |
15 |
NUT |
| 4 |
SPRING CARTRIDGE |
10 |
BODY |
16 |
FLANGE |
| 5 |
O-RING |
11 |
O-RING |
17 |
SCREW |
| 6 |
PISTON |
12 |
O-RING |
|
WEAR
PARTS |
MAX-AIR
RACK & PINION ACTUATORS •
ORDERING
INFO & SPECS
• UT-11/14 SPECS & ORDER INFO
• TORQUE INFO
INFORMATION
REQUEST FORM
FLOW
SYSTEMS
13650 T.I. Boulevard, Suite 106 • Dallas, TX 75243 • U.S.A. • Phone:
972-644-4395, 800-956-8447 • Fax: 972-644-4616
© 1999 - 2004
/ DESIGNED AND DEVELOPED BY h2 Global
|
|
|
